当前位置：产品详细
ABOUT ZERO ION
ZERO ION G3-500A is our third generation IPC J
STD approved resistivity of solvent extract (ROSE)
tester. Today's Zero Ion is more feature rich and
operator friendly than ever before and the dynamic
measurement technology continues to provide
accurate and highly sensitive cleanliness
measurement results essential for modern high
reliability manufacturing environments.
ZERO ION G3-500A 是第三代根据 IPC J-STD 标准而设计的
电阻率溶剂萃取发（ROSE）测试仪。新的 Win 10 ZERO ION
测试软件具有更友好的用户界面，更简易方便的操作，而持续
的动态测量技术以高可靠性、 稳定性的浸入式絮流冲洗方式，
提供高精度和高灵敏度的清洁度循环测量。
FEATURES 性能特点
Ultra sensitive dynamic measurement technology 超灵敏动态测量技术
Built-in universal assembly holder 内置通用测试蓝框支架
Windows 10 all-in-one PC platform 一体化控制电脑平台
Heavy-duty rolled stainless steel frame and panel construction
重型不锈钢框架和不锈钢桌面板，工业结构设计，耐腐蚀、防静电
Advanced statistical process control (spc) data logging
领先的过程控制统计（spc）数据记录
Non-heated spray under immersion with continuous filtration
自动温度补偿非加热浸入式絮流连续过滤
Sql multi-query searchable database 积分取样分析法数据库
Graphic touchscreen and keyboard operator interface
图形触摸屏和键盘操作界面
Intuitively guided calibration procedures built into software
直观向导式校验程序，自动修正内置软件测试补偿
Automatic recipe recall 自动密码调用
Wired and wireless network options 有线和无线网络可选
Built-in assembly surface area calculators 内置表面面积计算器
Included pdf report writer PDF 测试报告存档RELIABILITY MATTERS
高可靠高灵敏度测试
DYNAMIC ROSE TESTING
溶剂萃取物阻值（ROSE）测试技术
ZERO ION is an industry standard for resistivity
of solvent extract testing. The dynamic
measurement technology provides sensitive and
precise cleanliness data in compliance with WS
6536, IPC J-STD 001 TM 650 and other current
specifications.
ZERO ION 是溶剂萃取测试电阻率的行业标准。动态
测量技术提供了高灵敏和高精确的清洁度测试数据，
符合WS6536、IPCJ-STD001 TM650标准和其他现
行规范。
The dynamic method was found to be the most
sensitive ionic contamination test by the EMPF/US
Navy MIL2000A. The spray under immersion and
continuous filtration design allow for repeatable
and accurate process monitoring results.
动态测试法是EMPF/USNavy MIL2000A 创建的最灵
敏的离子污染量测试法，其连续的液下絮流过滤设计
提供可重复的精确的过程控制。
During a test the ZERO ION will
automatically regenerate the test solution
to 150 meg-ohms of resistance and then
prompt an operator to insert an assembly.
Testing will then automatically begin and
continue until the solution again reaches
150 meg-ohms. This continuous filtration,
while spraying the assemblies under
immersion, allows for optimal removal and
measurement of ionic process residues,
expressed as ug/in2 / ug/cm2.
开始测试时，系统先自动将测试液过滤到
150MΩ，再提示操作者放入待测工件，由于
工件上离子污染物扩散到测试液，测试液的阻
值将会跌倒较低数值，再通过持续的测试液下
动态絮流循环过滤，将测试液的阻值重新提升
到 150MΩ，在此过程中通过离子计数器将所
有过滤下来的离子以积分方式统计计算出离子
总量和 ug/in2 或 ug/cm2 单位面积的离子污染
量。
2021 Aqueous TechnologiesCalibrating the system is easy and
intuitive. Highlighted instructions
navigate a Zero Ion engineer through a
three point calibration low/mid/high
process. Data from calibration is
automatically saved into a report and
can be accessed remotely as well as
through an internal search.
系统校验程序直观和简便，工具条指示校验步
骤，设置低中高三点校验流程，系统校验数据
自动保存到系统校验参数中，并产生校验报告
文件。
友情链接